[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-1.slh.2-aptosid-amd64 (Debian 3.4-6) (s.l-h@gmx.de) (gcc version 4.7.0 (Debian 4.7.0-11) ) #1 SMP PREEMPT Tue Jun 5 20:08:42 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.4-1.slh.2-aptosid-amd64 root=UUID=2d1914be-f48c-4206-9c69-be2757799f13 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afef0000 (usable) [ 0.000000] BIOS-e820: 00000000afef0000 - 00000000afef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afef3000 - 00000000aff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000250000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: EVGA 132-CK-NF78/132-CK-NF78, BIOS 6.00 PG 01/16/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x250000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 100000000 mask F00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 240000000 mask FF0000000 write-back [ 0.000000] 3 base 000000000 mask F80000000 write-back [ 0.000000] 4 base 080000000 mask FE0000000 write-back [ 0.000000] 5 base 0A0000000 mask FF0000000 write-back [ 0.000000] 6 base 0AFF00000 mask FFFF00000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 4GB, range: 4GB, type WB [ 0.000000] reg 1, base: 8GB, range: 1GB, type WB [ 0.000000] reg 2, base: 9GB, range: 256MB, type WB [ 0.000000] reg 3, base: 0GB, range: 2GB, type WB [ 0.000000] reg 4, base: 2GB, range: 512MB, type WB [ 0.000000] reg 5, base: 2560MB, range: 256MB, type WB [ 0.000000] reg 6, base: 2815MB, range: 1MB, type UC [ 0.000000] total RAM covered: 8191M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 512MB, type WB [ 0.000000] reg 2, base: 2560MB, range: 256MB, type WB [ 0.000000] reg 3, base: 2815MB, range: 1MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 1GB, type WB [ 0.000000] reg 6, base: 9GB, range: 256MB, type WB [ 0.000000] e820 update range: 00000000aff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xafef0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f4020] f4020 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000afef0000 [ 0.000000] 0000000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00afef0000 page 4k [ 0.000000] kernel direct mapping tables up to afef0000 @ 1fffb000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000250000000 [ 0.000000] 0100000000 - 0250000000 page 2M [ 0.000000] kernel direct mapping tables up to 250000000 @ afee5000-afef0000 [ 0.000000] RAMDISK: 36962000 - 374a9000 [ 0.000000] ACPI: RSDP 00000000000f7fe0 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 00000000afef3040 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: FACP 00000000afef30c0 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: DSDT 00000000afef3180 05283 (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000afef0000 00040 [ 0.000000] ACPI: HPET 00000000afef8580 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098) [ 0.000000] ACPI: WDRT 00000000afef8600 00047 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: MCFG 00000000afef86c0 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: APIC 00000000afef8480 00098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000250000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000250000000 [ 0.000000] NODE_DATA [000000024ffec000 - 000000024fffffff] [ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880247600000-ffff88024f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00250000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x000afef0 [ 0.000000] 0: 0x00100000 -> 0x00250000 [ 0.000000] On node 0 totalpages: 2096763 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3910 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 700208 pages, LIFO batch:31 [ 0.000000] Normal zone: 21504 pages used for memmap [ 0.000000] Normal zone: 1354752 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000afef0000 - 00000000afef3000 [ 0.000000] PM: Registered nosave memory: 00000000afef3000 - 00000000aff00000 [ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:20100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88024fc00000 s77248 r8192 d21056 u524288 [ 0.000000] pcpu-alloc: s77248 r8192 d21056 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058870 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-1.slh.2-aptosid-amd64 root=UUID=2d1914be-f48c-4206-9c69-be2757799f13 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8170848k/9699328k available (3221k kernel code, 1312276k absent, 216204k reserved, 1809k data, 636k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2999.851 MHz processor. [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.70 BogoMIPS (lpj=2999851) [ 0.001008] pid_max: default: 32768 minimum: 301 [ 0.001030] Security Framework initialized [ 0.001034] SELinux: Disabled at boot. [ 0.001587] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006660] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.008934] Mount-cache hash table entries: 256 [ 0.009160] Initializing cgroup subsys cpuacct [ 0.009162] Initializing cgroup subsys memory [ 0.009178] Initializing cgroup subsys devices [ 0.009180] Initializing cgroup subsys freezer [ 0.009181] Initializing cgroup subsys net_cls [ 0.009183] Initializing cgroup subsys blkio [ 0.009189] Initializing cgroup subsys perf_event [ 0.009213] CPU: Physical Processor ID: 0 [ 0.009214] CPU: Processor Core ID: 0 [ 0.009216] mce: CPU supports 6 MCE banks [ 0.009224] CPU0: Thermal monitoring enabled (TM1) [ 0.009227] using mwait in idle threads. [ 0.009541] ACPI: Core revision 20120320 [ 0.012543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.022606] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 [ 0.022998] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.022998] ... version: 2 [ 0.022998] ... bit width: 40 [ 0.022998] ... generic registers: 2 [ 0.022998] ... value mask: 000000ffffffffff [ 0.022998] ... max period: 000000007fffffff [ 0.022998] ... fixed-purpose events: 3 [ 0.022998] ... event mask: 0000000700000003 [ 0.036014] Booting Node 0, Processors #1 [ 0.049013] Brought up 2 CPUs [ 0.049016] Total of 2 processors activated (11999.40 BogoMIPS). [ 0.050053] devtmpfs: initialized [ 0.053037] PM: Registering ACPI NVS region [mem 0xafef0000-0xafef2fff] (12288 bytes) [ 0.053068] NET: Registered protocol family 16 [ 0.053166] ACPI: bus type pci registered [ 0.053214] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.053217] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.070278] PCI: Using configuration type 1 for base access [ 0.070677] bio: create slab at 0 [ 0.070677] ACPI: Added _OSI(Module Device) [ 0.070677] ACPI: Added _OSI(Processor Device) [ 0.070677] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.070677] ACPI: Added _OSI(Processor Aggregator Device) [ 0.071698] ACPI: EC: Look up EC in DSDT [ 0.074882] ACPI: Interpreter enabled [ 0.074885] ACPI: (supports S0 S3 S4 S5) [ 0.074900] ACPI: Using IOAPIC for interrupt routing [ 0.078726] ACPI: No dock devices found. [ 0.078730] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.078786] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.078834] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.078837] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.078839] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.078840] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.078842] pci_root PNP0A08:00: host bridge window [mem 0xaff00000-0xcfffffff] [ 0.078865] PCI host bridge to bus 0000:00 [ 0.078867] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.078869] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.078871] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.078873] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.078875] pci_bus 0000:00: root bus resource [mem 0xaff00000-0xcfffffff] [ 0.078885] pci 0000:00:00.0: [10de:03a1] type 00 class 0x060000 [ 0.078936] pci 0000:00:00.1: [10de:03ac] type 00 class 0x050000 [ 0.078999] pci 0000:00:00.2: [10de:03aa] type 00 class 0x050000 [ 0.079059] pci 0000:00:00.3: [10de:03a9] type 00 class 0x050000 [ 0.079118] pci 0000:00:00.4: [10de:03ab] type 00 class 0x050000 [ 0.079176] pci 0000:00:00.5: [10de:03a8] type 00 class 0x050000 [ 0.079223] pci 0000:00:00.6: [10de:03b5] type 00 class 0x050000 [ 0.079282] pci 0000:00:00.7: [10de:03b4] type 00 class 0x050000 [ 0.079340] pci 0000:00:01.0: [10de:03ad] type 00 class 0x050000 [ 0.079387] pci 0000:00:01.1: [10de:03ae] type 00 class 0x050000 [ 0.079434] pci 0000:00:01.2: [10de:03af] type 00 class 0x050000 [ 0.079482] pci 0000:00:01.3: [10de:03b0] type 00 class 0x050000 [ 0.079529] pci 0000:00:01.4: [10de:03b1] type 00 class 0x050000 [ 0.079576] pci 0000:00:01.5: [10de:03b2] type 00 class 0x050000 [ 0.079624] pci 0000:00:01.6: [10de:03b3] type 00 class 0x050000 [ 0.079682] pci 0000:00:02.0: [10de:03b6] type 00 class 0x050000 [ 0.079730] pci 0000:00:02.1: [10de:03bc] type 00 class 0x050000 [ 0.079787] pci 0000:00:02.2: [10de:03ba] type 00 class 0x050000 [ 0.079892] pci 0000:00:03.0: [10de:03b7] type 01 class 0x060400 [ 0.079924] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.079958] pci 0000:00:09.0: [10de:0369] type 00 class 0x050000 [ 0.080149] pci 0000:00:0a.0: [10de:0360] type 00 class 0x060100 [ 0.080157] pci 0000:00:0a.0: reg 10: [io 0xfc00-0xfc7f] [ 0.080198] pci 0000:00:0a.1: [10de:0368] type 00 class 0x0c0500 [ 0.080212] pci 0000:00:0a.1: reg 10: [io 0xf800-0xf83f] [ 0.080233] pci 0000:00:0a.1: reg 20: [io 0xf400-0xf43f] [ 0.080240] pci 0000:00:0a.1: reg 24: [io 0xf000-0xf03f] [ 0.080275] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.080298] pci 0000:00:0b.0: [10de:036c] type 00 class 0x0c0310 [ 0.080308] pci 0000:00:0b.0: reg 10: [mem 0xcffff000-0xcfffffff] [ 0.080350] pci 0000:00:0b.0: supports D1 D2 [ 0.080352] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080365] pci 0000:00:0b.1: [10de:036d] type 00 class 0x0c0320 [ 0.080376] pci 0000:00:0b.1: reg 10: [mem 0xcfffe000-0xcfffe0ff] [ 0.080420] pci 0000:00:0b.1: supports D1 D2 [ 0.080422] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080441] pci 0000:00:0d.0: [10de:036e] type 00 class 0x01018a [ 0.080465] pci 0000:00:0d.0: reg 20: [io 0xec00-0xec0f] [ 0.080497] pci 0000:00:0e.0: [10de:037f] type 00 class 0x010185 [ 0.080508] pci 0000:00:0e.0: reg 10: [io 0x09f0-0x09f7] [ 0.080514] pci 0000:00:0e.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.080519] pci 0000:00:0e.0: reg 18: [io 0x0970-0x0977] [ 0.080524] pci 0000:00:0e.0: reg 1c: [io 0x0b70-0x0b73] [ 0.080530] pci 0000:00:0e.0: reg 20: [io 0xd800-0xd80f] [ 0.080535] pci 0000:00:0e.0: reg 24: [mem 0xcfffd000-0xcfffdfff] [ 0.080574] pci 0000:00:0e.1: [10de:037f] type 00 class 0x010185 [ 0.080585] pci 0000:00:0e.1: reg 10: [io 0x09e0-0x09e7] [ 0.080591] pci 0000:00:0e.1: reg 14: [io 0x0be0-0x0be3] [ 0.080596] pci 0000:00:0e.1: reg 18: [io 0x0960-0x0967] [ 0.080601] pci 0000:00:0e.1: reg 1c: [io 0x0b60-0x0b63] [ 0.080607] pci 0000:00:0e.1: reg 20: [io 0xc400-0xc40f] [ 0.080612] pci 0000:00:0e.1: reg 24: [mem 0xcfffc000-0xcfffcfff] [ 0.080652] pci 0000:00:0e.2: [10de:037f] type 00 class 0x010185 [ 0.080663] pci 0000:00:0e.2: reg 10: [io 0xc000-0xc007] [ 0.080669] pci 0000:00:0e.2: reg 14: [io 0xbc00-0xbc03] [ 0.080674] pci 0000:00:0e.2: reg 18: [io 0xb800-0xb807] [ 0.080680] pci 0000:00:0e.2: reg 1c: [io 0xb400-0xb403] [ 0.080685] pci 0000:00:0e.2: reg 20: [io 0xb000-0xb00f] [ 0.080690] pci 0000:00:0e.2: reg 24: [mem 0xcfffb000-0xcfffbfff] [ 0.080733] pci 0000:00:0f.0: [10de:0370] type 01 class 0x060401 [ 0.080787] pci 0000:00:11.0: [10de:0373] type 00 class 0x068000 [ 0.080801] pci 0000:00:11.0: reg 10: [mem 0xcfffa000-0xcfffafff] [ 0.080807] pci 0000:00:11.0: reg 14: [io 0xac00-0xac07] [ 0.080812] pci 0000:00:11.0: reg 18: [mem 0xcfff9000-0xcfff90ff] [ 0.080818] pci 0000:00:11.0: reg 1c: [mem 0xcfff8000-0xcfff800f] [ 0.080860] pci 0000:00:11.0: supports D1 D2 [ 0.080862] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080883] pci 0000:00:12.0: [10de:0373] type 00 class 0x068000 [ 0.080896] pci 0000:00:12.0: reg 10: [mem 0xcfff7000-0xcfff7fff] [ 0.080902] pci 0000:00:12.0: reg 14: [io 0xa800-0xa807] [ 0.080907] pci 0000:00:12.0: reg 18: [mem 0xcfff6000-0xcfff60ff] [ 0.080913] pci 0000:00:12.0: reg 1c: [mem 0xcfff5000-0xcfff500f] [ 0.080956] pci 0000:00:12.0: supports D1 D2 [ 0.080957] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080978] pci 0000:00:13.0: [10de:0376] type 01 class 0x060400 [ 0.081023] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.081074] pci 0000:01:00.0: [10de:05b1] type 01 class 0x060400 [ 0.081118] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.083002] pci 0000:00:03.0: PCI bridge to [bus 01-04] [ 0.083007] pci 0000:00:03.0: bridge window [io 0x9000-0x9fff] [ 0.083010] pci 0000:00:03.0: bridge window [mem 0xca000000-0xcdffffff] [ 0.083015] pci 0000:00:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.083054] pci 0000:02:00.0: [10de:05b1] type 01 class 0x060400 [ 0.083106] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.083123] pci 0000:02:02.0: [10de:05b1] type 01 class 0x060400 [ 0.083162] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.083189] pci 0000:01:00.0: PCI bridge to [bus 02-04] [ 0.083193] pci 0000:01:00.0: bridge window [io 0x9000-0x9fff] [ 0.083196] pci 0000:01:00.0: bridge window [mem 0xca000000-0xcdffffff] [ 0.083200] pci 0000:01:00.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.083235] pci 0000:03:00.0: [10de:0421] type 00 class 0x030000 [ 0.083246] pci 0000:03:00.0: reg 10: [mem 0xcc000000-0xccffffff] [ 0.083259] pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.083271] pci 0000:03:00.0: reg 1c: [mem 0xca000000-0xcbffffff 64bit] [ 0.083279] pci 0000:03:00.0: reg 24: [io 0x9c00-0x9c7f] [ 0.083287] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.085004] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 0.085009] pci 0000:02:00.0: bridge window [io 0x9000-0x9fff] [ 0.085014] pci 0000:02:00.0: bridge window [mem 0xca000000-0xcdffffff] [ 0.085020] pci 0000:02:00.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.085047] pci 0000:02:02.0: PCI bridge to [bus 04-04] [ 0.085107] pci 0000:05:07.0: [104c:8023] type 00 class 0x0c0010 [ 0.085120] pci 0000:05:07.0: reg 10: [mem 0xcfeff000-0xcfeff7ff] [ 0.085128] pci 0000:05:07.0: reg 14: [mem 0xcfef8000-0xcfefbfff] [ 0.085179] pci 0000:05:07.0: supports D1 D2 [ 0.085181] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot [ 0.085196] pci 0000:05:09.0: [13f6:8788] type 00 class 0x040100 [ 0.085209] pci 0000:05:09.0: reg 10: [io 0x8c00-0x8cff] [ 0.085264] pci 0000:05:09.0: supports D1 D2 [ 0.085289] pci 0000:00:0f.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.085292] pci 0000:00:0f.0: bridge window [io 0x8000-0x8fff] [ 0.085294] pci 0000:00:0f.0: bridge window [mem 0xcfe00000-0xcfefffff] [ 0.085297] pci 0000:00:0f.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.085299] pci 0000:00:0f.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.085301] pci 0000:00:0f.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.085303] pci 0000:00:0f.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.085306] pci 0000:00:0f.0: bridge window [mem 0xaff00000-0xcfffffff] (subtractive decode) [ 0.085335] pci 0000:00:13.0: PCI bridge to [bus 06-06] [ 0.085349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.085543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.085674] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.085716] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.110872] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.110912] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15) [ 0.110946] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.110982] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) [ 0.111021] ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 *10 11 14 15) [ 0.111056] ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.111090] ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.111124] ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.111159] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.111194] ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15) [ 0.111229] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.111269] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.111303] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.111339] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.111373] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.111408] ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 9 10 *11 14 15) [ 0.111443] ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 9 10 *11 14 15) [ 0.111483] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15) [ 0.111545] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.111603] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.111657] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.111712] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.111766] ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0 [ 0.111821] ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled. [ 0.111875] ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0, disabled. [ 0.111930] ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0, disabled. [ 0.111985] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 [ 0.112045] ACPI: PCI Interrupt Link [AMA1] (IRQs 20 21 22 23) *0 [ 0.112100] ACPI: PCI Interrupt Link [AMAC] (IRQs 20 21 22 23) *0 [ 0.112156] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.112212] ACPI: PCI Interrupt Link [AACI] (IRQs 20 21 22 23) *0, disabled. [ 0.112267] ACPI: PCI Interrupt Link [AMCI] (IRQs 20 21 22 23) *0, disabled. [ 0.112323] ACPI: PCI Interrupt Link [ASMB] (IRQs 20 21 22 23) *0, disabled. [ 0.112379] ACPI: PCI Interrupt Link [AUS2] (IRQs 20 21 22 23) *0 [ 0.112434] ACPI: PCI Interrupt Link [AIDE] (IRQs 20 21 22 23) *0, disabled. [ 0.112490] ACPI: PCI Interrupt Link [ASA0] (IRQs 20 21 22 23) *0 [ 0.112545] ACPI: PCI Interrupt Link [ASA1] (IRQs 20 21 22 23) *0 [ 0.112603] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.112650] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.112650] vgaarb: loaded [ 0.112650] vgaarb: bridge control possible 0000:03:00.0 [ 0.112650] PCI: Using ACPI for IRQ routing [ 0.119190] PCI: pci_cache_line_size set to 64 bytes [ 0.119284] reserve RAM buffer: 000000000009b800 - 000000000009ffff [ 0.119286] reserve RAM buffer: 00000000afef0000 - 00000000afffffff [ 0.119354] NetLabel: Initializing [ 0.119355] NetLabel: domain hash size = 128 [ 0.119356] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.119365] NetLabel: unlabeled traffic allowed by default [ 0.119382] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.119388] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.119392] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.124012] Switching to clocksource hpet [ 0.124049] pnp: PnP ACPI init [ 0.124062] ACPI: bus type pnp registered [ 0.124072] pnp 00:00: [io 0x1000-0x107f] [ 0.124074] pnp 00:00: [io 0x1080-0x10ff] [ 0.124075] pnp 00:00: [io 0x1400-0x147f] [ 0.124077] pnp 00:00: [io 0x1480-0x14ff] [ 0.124078] pnp 00:00: [io 0x1800-0x187f] [ 0.124080] pnp 00:00: [io 0x1880-0x18ff] [ 0.124118] system 00:00: [io 0x1000-0x107f] has been reserved [ 0.124120] system 00:00: [io 0x1080-0x10ff] has been reserved [ 0.124122] system 00:00: [io 0x1400-0x147f] has been reserved [ 0.124124] system 00:00: [io 0x1480-0x14ff] has been reserved [ 0.124126] system 00:00: [io 0x1800-0x187f] has been reserved [ 0.124128] system 00:00: [io 0x1880-0x18ff] has been reserved [ 0.124130] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.124169] pnp 00:01: [bus 00-ff] [ 0.124171] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.124173] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.124174] pnp 00:01: [io 0x0d00-0xffff window] [ 0.124176] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.124178] pnp 00:01: [mem 0x000c0000-0x000dffff window] [ 0.124180] pnp 00:01: [mem 0xaff00000-0xcfffffff window] [ 0.124214] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.124260] pnp 00:02: [io 0x0010-0x001f] [ 0.124261] pnp 00:02: [io 0x0022-0x003f] [ 0.124263] pnp 00:02: [io 0x0044-0x005f] [ 0.124264] pnp 00:02: [io 0x0062-0x0063] [ 0.124266] pnp 00:02: [io 0x0065-0x006f] [ 0.124267] pnp 00:02: [io 0x0074-0x007f] [ 0.124269] pnp 00:02: [io 0x0091-0x0093] [ 0.124270] pnp 00:02: [io 0x00a2-0x00bf] [ 0.124271] pnp 00:02: [io 0x00e0-0x00ef] [ 0.124273] pnp 00:02: [io 0x04d0-0x04d1] [ 0.124274] pnp 00:02: [io 0x0295-0x0314] [ 0.124276] pnp 00:02: [io 0x0880-0x088f] [ 0.124326] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.124328] system 00:02: [io 0x0295-0x0314] has been reserved [ 0.124330] system 00:02: [io 0x0880-0x088f] has been reserved [ 0.124332] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.124341] pnp 00:03: [dma 4] [ 0.124342] pnp 00:03: [io 0x0000-0x000f] [ 0.124344] pnp 00:03: [io 0x0080-0x0090] [ 0.124345] pnp 00:03: [io 0x0094-0x009f] [ 0.124347] pnp 00:03: [io 0x00c0-0x00df] [ 0.124368] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.124395] pnp 00:04: [irq 0 disabled] [ 0.124401] pnp 00:04: [irq 8] [ 0.124402] pnp 00:04: [mem 0xfeff0000-0xfeff03ff] [ 0.124426] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.124443] pnp 00:05: [io 0x0070-0x0071] [ 0.124444] pnp 00:05: [io 0x0072-0x0073] [ 0.124469] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.124475] pnp 00:06: [io 0x0061] [ 0.124497] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.124503] pnp 00:07: [io 0x00f0-0x00ff] [ 0.124507] pnp 00:07: [irq 13] [ 0.124531] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.124614] pnp 00:08: [io 0x03f0-0x03f5] [ 0.124616] pnp 00:08: [io 0x03f7] [ 0.124622] pnp 00:08: [irq 6] [ 0.124623] pnp 00:08: [dma 2] [ 0.124655] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.124776] pnp 00:09: [io 0x03f8-0x03ff] [ 0.124780] pnp 00:09: [irq 4] [ 0.124826] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.124859] pnp 00:0a: [irq 12] [ 0.124886] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.124903] pnp 00:0b: [io 0x0060] [ 0.124905] pnp 00:0b: [io 0x0064] [ 0.124909] pnp 00:0b: [irq 1] [ 0.124938] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.125351] pnp 00:0c: [mem 0xe0000000-0xefffffff] [ 0.125404] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.125407] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125491] pnp 00:0d: [mem 0x000d0000-0x000d3fff] [ 0.125493] pnp 00:0d: [mem 0x000d5800-0x000d7fff] [ 0.125494] pnp 00:0d: [mem 0x000f0000-0x000fbfff] [ 0.125496] pnp 00:0d: [mem 0x000fc000-0x000fffff] [ 0.125497] pnp 00:0d: [mem 0xafef0000-0xafefffff] [ 0.125499] pnp 00:0d: [mem 0xffff0000-0xffffffff] [ 0.125501] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.125502] pnp 00:0d: [mem 0x00100000-0xafeeffff] [ 0.125504] pnp 00:0d: [mem 0xfec00000-0xfec00fff] [ 0.125505] pnp 00:0d: [mem 0xd0000000-0xdfffffff] [ 0.125507] pnp 00:0d: [mem 0xfee00000-0xfee00fff] [ 0.125508] pnp 00:0d: [mem 0xfeff0000] [ 0.125567] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.125570] system 00:0d: [mem 0x000d5800-0x000d7fff] has been reserved [ 0.125572] system 00:0d: [mem 0x000f0000-0x000fbfff] could not be reserved [ 0.125574] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.125576] system 00:0d: [mem 0xafef0000-0xafefffff] could not be reserved [ 0.125578] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved [ 0.125580] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.125583] system 00:0d: [mem 0x00100000-0xafeeffff] could not be reserved [ 0.125585] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.125587] system 00:0d: [mem 0xd0000000-0xdfffffff] has been reserved [ 0.125589] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.125591] system 00:0d: [mem 0xfeff0000] has been reserved [ 0.125593] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.125599] pnp: PnP ACPI: found 14 devices [ 0.125600] ACPI: ACPI bus type pnp unregistered [ 0.132025] pci 0000:03:00.0: BAR 6: assigned [mem 0xcd000000-0xcd01ffff pref] [ 0.132028] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 0.132030] pci 0000:02:00.0: bridge window [io 0x9000-0x9fff] [ 0.132034] pci 0000:02:00.0: bridge window [mem 0xca000000-0xcdffffff] [ 0.132037] pci 0000:02:00.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.132042] pci 0000:02:02.0: PCI bridge to [bus 04-04] [ 0.132049] pci 0000:01:00.0: PCI bridge to [bus 02-04] [ 0.132052] pci 0000:01:00.0: bridge window [io 0x9000-0x9fff] [ 0.132055] pci 0000:01:00.0: bridge window [mem 0xca000000-0xcdffffff] [ 0.132059] pci 0000:01:00.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.132063] pci 0000:00:03.0: PCI bridge to [bus 01-04] [ 0.132065] pci 0000:00:03.0: bridge window [io 0x9000-0x9fff] [ 0.132068] pci 0000:00:03.0: bridge window [mem 0xca000000-0xcdffffff] [ 0.132071] pci 0000:00:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.132074] pci 0000:00:0f.0: PCI bridge to [bus 05-05] [ 0.132076] pci 0000:00:0f.0: bridge window [io 0x8000-0x8fff] [ 0.132080] pci 0000:00:0f.0: bridge window [mem 0xcfe00000-0xcfefffff] [ 0.132084] pci 0000:00:13.0: PCI bridge to [bus 06-06] [ 0.132102] pci 0000:00:0f.0: setting latency timer to 64 [ 0.132107] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.132109] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.132111] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.132112] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.132114] pci_bus 0000:00: resource 8 [mem 0xaff00000-0xcfffffff] [ 0.132116] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] [ 0.132118] pci_bus 0000:01: resource 1 [mem 0xca000000-0xcdffffff] [ 0.132120] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.132122] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.132123] pci_bus 0000:02: resource 1 [mem 0xca000000-0xcdffffff] [ 0.132125] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.132127] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff] [ 0.132129] pci_bus 0000:03: resource 1 [mem 0xca000000-0xcdffffff] [ 0.132131] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.132133] pci_bus 0000:05: resource 0 [io 0x8000-0x8fff] [ 0.132135] pci_bus 0000:05: resource 1 [mem 0xcfe00000-0xcfefffff] [ 0.132137] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.132138] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.132140] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.132142] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.132144] pci_bus 0000:05: resource 8 [mem 0xaff00000-0xcfffffff] [ 0.132175] NET: Registered protocol family 2 [ 0.132344] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.133321] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.136999] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.137561] TCP: Hash tables configured (established 524288 bind 65536) [ 0.137563] TCP: reno registered [ 0.137576] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.137659] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.137836] NET: Registered protocol family 1 [ 0.138119] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 0.201168] ACPI: PCI Interrupt Link [AUS2] enabled at IRQ 22 [ 0.201308] pci 0000:03:00.0: Boot video device [ 0.201315] PCI: CLS 4 bytes, default 64 [ 0.201364] Unpacking initramfs... [ 0.391420] Freeing initrd memory: 11548k freed [ 0.397140] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.397145] Placing 64MB software IO TLB between ffff8800abee5000 - ffff8800afee5000 [ 0.397147] software IO TLB at phys 0xabee5000 - 0xafee5000 [ 0.397536] audit: initializing netlink socket (disabled) [ 0.397555] type=2000 audit(1339311658.396:1): initialized [ 0.398168] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.400237] VFS: Disk quotas dquot_6.5.2 [ 0.400275] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.400354] msgmni has been set to 15981 [ 0.400553] alg: No test for stdrng (krng) [ 0.400585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.400615] io scheduler noop registered [ 0.400616] io scheduler deadline registered [ 0.400659] io scheduler cfq registered (default) [ 0.400782] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X [ 0.400852] pcieport 0000:00:13.0: irq 41 for MSI/MSI-X [ 0.400987] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 0.400989] pcieport 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.400991] pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.400992] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.400994] pcieport 0000:02:02.0: Signaling PME through PCIe PME interrupt [ 0.400997] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 0.401024] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt [ 0.401029] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded [ 0.401089] intel_idle: does not run on family 6 model 23 [ 0.401135] GHES: HEST is not enabled! [ 0.401185] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.421711] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.442494] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.442747] Linux agpgart interface v0.103 [ 0.442795] Fixed MDIO Bus: probed [ 0.442833] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.445465] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.445484] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.445536] mousedev: PS/2 mouse device common for all mice [ 0.445577] rtc_cmos 00:05: RTC can wake from S4 [ 0.445702] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.445732] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.445740] cpuidle: using governor ladder [ 0.445741] cpuidle: using governor menu [ 0.445893] EFI Variables Facility v0.08 2004-May-17 [ 0.445980] TCP: cubic registered [ 0.446066] NET: Registered protocol family 10 [ 0.446263] Registering the dns_resolver key type [ 0.446376] registered taskstats version 1 [ 0.446746] IMA: No TPM chip found, activating TPM-bypass! [ 0.447112] rtc_cmos 00:05: setting system clock to 2012-06-10 07:00:59 UTC (1339311659) [ 0.447223] Freeing unused kernel memory: 636k freed [ 0.464288] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.497216] udevd[58]: starting version 175 [ 0.532544] SCSI subsystem initialized [ 0.546414] usbcore: registered new interface driver usbfs [ 0.546425] usbcore: registered new interface driver hub [ 0.546646] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.546816] ACPI: PCI Interrupt Link [AMAC] enabled at IRQ 21 [ 0.546832] forcedeth 0000:00:11.0: setting latency timer to 64 [ 0.548524] libata version 3.00 loaded. [ 0.549032] usbcore: registered new device driver usb [ 0.549290] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.557832] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.561534] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 0.580434] Floppy drive(s): fd0 is 1.44M [ 0.595931] FDC 0 is a post-1991 82077 [ 0.612076] firewire_ohci 0000:05:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.068442] forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:04:4b:14:8b:2f [ 1.068445] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.068601] ACPI: PCI Interrupt Link [AMA1] enabled at IRQ 20 [ 1.068613] forcedeth 0000:00:12.0: setting latency timer to 64 [ 1.113107] firewire_core 0000:05:07.0: created device fw0: GUID 5ad10d8000044b16, S400 [ 1.400091] Refined TSC clocksource calibration: 2999.992 MHz. [ 1.400095] Switching to clocksource tsc [ 1.590347] forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 2, addr 00:04:4b:14:8b:31 [ 1.590350] forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.590365] sata_nv 0000:00:0e.0: version 3.5 [ 1.590472] ACPI: PCI Interrupt Link [ASA0] enabled at IRQ 23 [ 1.590475] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 1.590653] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 1.590949] scsi0 : sata_nv [ 1.591079] scsi1 : sata_nv [ 1.591157] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 [ 1.591159] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 [ 1.591268] ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 22 [ 1.591271] sata_nv 0000:00:0e.1: Using SWNCQ mode [ 1.591298] sata_nv 0000:00:0e.1: setting latency timer to 64 [ 1.591491] scsi2 : sata_nv [ 1.591643] scsi3 : sata_nv [ 1.591720] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22 [ 1.591722] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22 [ 1.591828] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 1.591831] sata_nv 0000:00:0e.2: Using SWNCQ mode [ 1.591858] sata_nv 0000:00:0e.2: setting latency timer to 64 [ 1.592089] scsi4 : sata_nv [ 1.592144] scsi5 : sata_nv [ 1.592223] ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb000 irq 21 [ 1.592225] ata6: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 21 [ 1.592248] pata_amd 0000:00:0d.0: version 0.4.1 [ 1.592272] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 1.592485] scsi6 : pata_amd [ 1.592537] scsi7 : pata_amd [ 1.592805] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xec00 irq 14 [ 1.592808] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xec08 irq 15 [ 1.592831] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 1.592834] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 1.592840] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 1.592857] ehci_hcd 0000:00:0b.1: debug port 1 [ 1.592863] ehci_hcd 0000:00:0b.1: cache line size of 4 is not supported [ 1.592867] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xcfffe000 [ 1.598012] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 1.598033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.598036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.598039] usb usb1: Product: EHCI Host Controller [ 1.598041] usb usb1: Manufacturer: Linux 3.4-1.slh.2-aptosid-amd64 ehci_hcd [ 1.598043] usb usb1: SerialNumber: 0000:00:0b.1 [ 1.598143] hub 1-0:1.0: USB hub found [ 1.598147] hub 1-0:1.0: 10 ports detected [ 1.598238] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 1.598240] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 1.598246] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 1.598256] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xcffff000 [ 1.651038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.651040] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.651042] usb usb2: Product: OHCI Host Controller [ 1.651044] usb usb2: Manufacturer: Linux 3.4-1.slh.2-aptosid-amd64 ohci_hcd [ 1.651045] usb usb2: SerialNumber: 0000:00:0b.0 [ 1.651112] hub 2-0:1.0: USB hub found [ 1.651117] hub 2-0:1.0: 10 ports detected [ 1.900013] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.035759] usb 1-1: New USB device found, idVendor=0846, idProduct=9030 [ 2.035763] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 2.035765] usb 1-1: Product: WNA1100 [ 2.035767] usb 1-1: Manufacturer: NETGEAR WNA [ 2.035769] usb 1-1: SerialNumber: 12345 [ 2.045020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.046020] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.046026] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.047347] ata3.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133 [ 2.047350] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.048792] ata3.00: configured for UDMA/133 [ 2.048817] ata1.00: ATA-7: WDC WD1500ADFD-00NLR5, 21.07QR5, max UDMA/133 [ 2.048820] ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.049129] ata5.00: ATAPI: ASUS DRW-2014L1T, 1.02, max UDMA/66 [ 2.054810] ata1.00: configured for UDMA/133 [ 2.054919] scsi 0:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 21.0 PQ: 0 ANSI: 5 [ 2.055142] ata5.00: configured for UDMA/66 [ 2.399020] usb 2-7: new full-speed USB device number 2 using ohci_hcd [ 2.509046] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.512307] ata2.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 2.512311] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.518309] ata2.00: configured for UDMA/133 [ 2.518392] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 2.518533] scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 2.579045] usb 2-7: New USB device found, idVendor=046d, idProduct=08d7 [ 2.579049] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.821013] ata4: SATA link down (SStatus 0 SControl 300) [ 2.821542] scsi 4:0:0:0: CD-ROM ASUS DRW-2014L1T 1.02 PQ: 0 ANSI: 5 [ 3.275049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.294306] ata6.00: ATA-8: WDC WD10EALS-00Z8A0, 05.01D05, max UDMA/133 [ 3.294309] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.300266] ata6.00: configured for UDMA/133 [ 3.300350] scsi 5:0:0:0: Direct-Access ATA WDC WD10EALS-00Z 05.0 PQ: 0 ANSI: 5 [ 3.300468] ata8: port disabled--ignoring [ 3.308481] sd 0:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB) [ 3.308518] sd 0:0:0:0: [sda] Write Protect is off [ 3.308520] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.308536] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.308894] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.308930] sd 1:0:0:0: [sdb] Write Protect is off [ 3.308932] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.308948] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.309298] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.309333] sd 2:0:0:0: [sdc] Write Protect is off [ 3.309335] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.309351] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.309669] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.309704] sd 5:0:0:0: [sdd] Write Protect is off [ 3.309706] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.309722] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.315946] sdb: sdb1 [ 3.316125] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.325938] sdc: sdc1 [ 3.326100] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.333306] sda: sda1 sda2 sda3 [ 3.333552] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.344727] sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 > [ 3.344975] sd 5:0:0:0: [sdd] Attached SCSI disk [ 3.347636] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.347640] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.347797] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.906544] device-mapper: uevent: version 1.0.3 [ 3.906819] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.920072] PM: Starting manual resume from disk [ 3.954014] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.880563] udevd[377]: starting version 175 [ 6.375278] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 6.375282] ACPI: Power Button [PWRB] [ 6.375336] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 6.375339] ACPI: Power Button [PWRF] [ 6.600252] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 6.638277] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 127 [ 6.729869] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x0 [ 6.772555] i2c i2c-0: nForce2 SMBus adapter at 0xf400 [ 6.772570] i2c i2c-1: nForce2 SMBus adapter at 0xf000 [ 6.900265] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 6.900343] nv_tco: Watchdog reboot detected [ 6.900456] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0) [ 7.009235] cfg80211: Calling CRDA to update world regulatory domain [ 7.026415] Linux media interface: v0.10 [ 7.109286] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x0 [ 7.110742] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 7.127146] Linux video capture interface: v2.00 [ 7.138119] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 7.141341] gspca_main: v2.14.0 registered [ 7.169583] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested [ 7.169597] usbcore: registered new interface driver ath9k_htc [ 7.297112] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d7 [ 7.415468] [drm] Initialized drm 1.1.0 20060810 [ 7.487323] wmi: Mapper loaded [ 7.610604] ACPI: PCI Interrupt Link [AXV5] enabled at IRQ 16 [ 7.610943] [drm] nouveau 0000:03:00.0: Detected an NV50 generation card (0x086100a2) [ 7.614034] [drm] nouveau 0000:03:00.0: Checking PRAMIN for VBIOS [ 7.674415] [drm] nouveau 0000:03:00.0: ... appears to be valid [ 7.674417] [drm] nouveau 0000:03:00.0: Using VBIOS from PRAMIN [ 7.674420] [drm] nouveau 0000:03:00.0: BIT BIOS found [ 7.674422] [drm] nouveau 0000:03:00.0: Bios version 60.86.34.00 [ 7.674425] [drm] nouveau 0000:03:00.0: TMDS table version 2.0 [ 7.674488] [drm] nouveau 0000:03:00.0: MXM: no VBIOS data, nothing to do [ 7.674490] [drm] nouveau 0000:03:00.0: DCB version 4.0 [ 7.674493] [drm] nouveau 0000:03:00.0: DCB outp 00: 02000300 00000028 [ 7.674495] [drm] nouveau 0000:03:00.0: DCB outp 01: 04011310 00010028 [ 7.674497] [drm] nouveau 0000:03:00.0: DCB outp 02: 02011312 00000030 [ 7.674498] [drm] nouveau 0000:03:00.0: DCB outp 03: 010223f1 00c0c080 [ 7.674500] [drm] nouveau 0000:03:00.0: DCB conn 00: 1030 [ 7.674502] [drm] nouveau 0000:03:00.0: DCB conn 01: 0100 [ 7.674503] [drm] nouveau 0000:03:00.0: DCB conn 02: 0210 [ 7.674505] [drm] nouveau 0000:03:00.0: DCB conn 03: 0211 [ 7.674507] [drm] nouveau 0000:03:00.0: DCB conn 04: 0213 [ 7.674511] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xBC41 [ 7.697715] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xBF5C [ 7.714086] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xCB9E [ 7.714094] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xCC90 [ 7.715165] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xCE73 [ 7.715166] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0xCED8 [ 7.735172] [drm] nouveau 0000:03:00.0: 0xCED8: Condition still not met after 20ms, skipping following opcodes [ 7.736466] [TTM] Zone kernel: Available graphics memory: 4091516 kiB [ 7.736468] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 7.736470] [TTM] Initializing pool allocator [ 7.736473] [TTM] Initializing DMA pool allocator [ 7.736482] [drm] nouveau 0000:03:00.0: Detected 256MiB VRAM (DDR2) [ 7.739242] [drm] nouveau 0000:03:00.0: 512 MiB GART (aperture) [ 7.745558] [drm] nouveau 0000:03:00.0: DCB encoder 1 unknown [ 7.745560] [drm] nouveau 0000:03:00.0: TV-1 has no encoders, removing [ 7.746105] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.746107] [drm] No driver support for vblank timestamp query. [ 7.751173] [drm] nouveau 0000:03:00.0: 1 available performance level(s) [ 7.751177] [drm] nouveau 0000:03:00.0: 0: core 459MHz shader 918MHz memory 400MHz fanspeed 100% [ 7.751180] [drm] nouveau 0000:03:00.0: c: core 459MHz shader 918MHz memory 399MHz voltage 1320mV [ 7.853570] [drm] nouveau 0000:03:00.0: allocated 1280x1024 fb: 0x310000, bo ffff8802436e6400 [ 7.853616] fbcon: nouveaufb (fb0) is primary device [ 7.877321] Console: switching to colour frame buffer device 160x64 [ 7.878749] fb0: nouveaufb frame buffer device [ 7.878750] drm: registered panic notifier [ 7.878754] [drm] Initialized nouveau 1.0.0 20120316 for 0000:03:00.0 on minor 0 [ 7.928076] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 8.023139] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 [ 8.116379] cfg80211: World regulatory domain updated: [ 8.116382] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.116384] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.116386] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.116388] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.116390] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.116515] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.258261] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits [ 8.454889] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3 [ 8.454892] ath: EEPROM regdomain: 0x60 [ 8.454894] ath: EEPROM indicates we should expect a direct regpair map [ 8.454898] ath: Country alpha2 being used: 00 [ 8.454899] ath: Regpair used: 0x60 [ 8.475994] ieee80211 phy0: Atheros AR9271 Rev:1 [ 8.477786] Registered led device: ath9k_htc-phy0 [ 8.623100] input: gspca_zc3xx as /devices/pci0000:00/0000:00:0b.0/usb2/2-7/input/input5 [ 8.623211] usbcore: registered new interface driver gspca_zc3xx [ 8.629364] usbcore: registered new interface driver snd-usb-audio [ 9.219308] Adding 15623176k swap on /dev/sdd5. Priority:-1 extents:1 across:15623176k [ 9.274091] Adding 8193144k swap on /dev/sda3. Priority:-2 extents:1 across:8193144k [ 9.283324] EXT4-fs (sda2): re-mounted. Opts: (null) [ 9.563290] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,barrier=0 [ 10.593810] fuse init (API version 7.18) [ 10.743341] EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 10.830197] kjournald starting. Commit interval 5 seconds [ 10.830384] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended [ 10.830713] EXT3-fs (sdc1): using internal journal [ 10.830716] EXT3-fs (sdc1): mounted filesystem with writeback data mode [ 10.875221] EXT4-fs (sdd7): warning: maximal mount count reached, running e2fsck is recommended [ 10.900043] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: (null) [ 10.963205] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended [ 10.985585] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 12.242374] forcedeth 0000:00:12.0: irq 42 for MSI/MSI-X [ 12.242400] forcedeth 0000:00:12.0: eth1: MSI enabled [ 12.242621] forcedeth 0000:00:12.0: eth1: no link during initialization [ 12.243829] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.244415] forcedeth 0000:00:11.0: irq 43 for MSI/MSI-X [ 12.244435] forcedeth 0000:00:11.0: eth0: MSI enabled [ 12.244656] forcedeth 0000:00:11.0: eth0: no link during initialization [ 12.245809] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.358204] NET: Registered protocol family 17 [ 12.838563] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.576335] wlan0: authenticate with b8:e6:25:6b:69:c8 [ 14.666648] wlan0: send auth to b8:e6:25:6b:69:c8 (try 1/3) [ 14.668415] wlan0: authenticated [ 14.714007] wlan0: associate with b8:e6:25:6b:69:c8 (try 1/3) [ 14.716786] wlan0: RX AssocResp from b8:e6:25:6b:69:c8 (capab=0x431 status=0 aid=2) [ 14.716790] wlan0: associated [ 14.722362] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 14.722396] cfg80211: Calling CRDA for country: US [ 14.725294] ath: regdomain 0x8348 updated by CountryIE [ 14.725297] ath: EEPROM regdomain: 0x8348 [ 14.725298] ath: EEPROM indicates we should expect a country code [ 14.725299] ath: doing EEPROM country->regdmn map search [ 14.725301] ath: country maps to regdmn code: 0x3a [ 14.725302] ath: Country alpha2 being used: US [ 14.725303] ath: Regpair used: 0x3a [ 14.725305] cfg80211: Regulatory domain changed to country: US [ 14.725306] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.725308] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 14.725310] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 14.725312] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.725314] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.725316] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.725318] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 15.104246] Bluetooth: Core ver 2.16 [ 15.104259] NET: Registered protocol family 31 [ 15.104261] Bluetooth: HCI device and connection manager initialized [ 15.104262] Bluetooth: HCI socket layer initialized [ 15.104264] Bluetooth: L2CAP socket layer initialized [ 15.104268] Bluetooth: SCO socket layer initialized [ 15.131258] Bluetooth: RFCOMM TTY layer initialized [ 15.131261] Bluetooth: RFCOMM socket layer initialized [ 15.131262] Bluetooth: RFCOMM ver 1.11 [ 15.245783] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.245785] Bluetooth: BNEP filters: protocol multicast [ 16.034122] lp: driver loaded but no devices found [ 16.093976] ppdev: user-space parallel port driver [ 21.759001] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 [ 21.764207] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 [ 25.474009] wlan0: no IPv6 routers present [ 1506.576218] wlan0: deauthenticating from b8:e6:25:6b:69:c8 by local choice (reason=3) [ 1506.629147] cfg80211: Calling CRDA to update world regulatory domain [ 1506.632156] cfg80211: World regulatory domain updated: [ 1506.632158] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1506.632161] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1506.632163] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1506.632165] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1506.632167] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1506.632169] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1511.812835] ADDRCONF(NETDEV_UP): wlan0: link is not ready